The drum spins, the cycle runs its full length, and the clothes come out cold and damp. That is where dryer repair in Brampton often begins, with a machine that turns but never gets warm. The cause sits in the parts that produce heat, and those parts differ between an electric dryer and a gas one. We diagnose which type you have and test the right components, so you are not guessing and not paying for the wrong fix.
No heat on an electric dryer
On an electric dryer, no heat usually traces to a failed heating element or a blown thermal fuse. The element is what warms the air, and when it burns out the drum keeps turning while the air stays cold. The thermal fuse is a safety part that cuts the heat when the dryer runs too hot, often because airflow is poor, and once it trips the dryer will not heat again until it is replaced. We test both, confirm which has failed, and fit the correct replacement.
No heat on a gas dryer
On a gas dryer, cold air points more often to the igniter or the gas valve coils. The igniter has to glow hot enough to light the gas, and a weak or dead igniter leaves the burner unlit. The valve coils open the gas supply, and when they fail the flame will not stay lit through the cycle. This is gas work, and it belongs with a technician who does it properly. We service gas dryers as well as electric, licensed and insured, so either way you have the right person on the job. If you are also dealing with a range that will not light, our team handles gas and electric oven and stove repair too.
Running, but not drying well
When a dryer runs a full cycle and the clothes are still damp, the problem is usually one of two things. Either the heat source is weak, or the air cannot move the way it should. Poor airflow is the one homeowners miss, because the dryer looks like it is working. Longer and longer drying times are the early sign.
A common cause of weak airflow is a restricted or blocked vent or duct. When lint builds up in the ductwork or the run is crimped, hot moist air cannot escape, so your clothes stay wet and the dryer works harder than it should. As part of a repair we check the vent and duct, and if we find a restriction affecting your drying, we address it and tell you plainly what we found. That check is part of getting the machine drying properly again, not a separate cleaning service.
A long or awkward duct run to the outside makes a restriction more likely, and it is worth checking when drying times climb. Catching it early also keeps your dryer from overheating, since the same trapped air that leaves clothes damp is what drives the temperature up.
Gas and electric dryers, one trusted local team
Whichever type of dryer you own, and whatever the brand, we can help. We repair Samsung, LG, Whirlpool, and Maytag dryers, along with the other makes common in local homes. We work on both gas and electric models, we are licensed and insured, and we keep the work affordable and straight with you. You get a trusted local technician, a clear diagnosis, and a fix that gets your laundry moving again.
When it is time to replace a dryer rather than repair one, or you are setting up a new machine, we also handle dryer and appliance installation. To find the right service for whatever is acting up around the home, start from our Brampton appliance repair homepage. For a dryer that will not heat, tumble, or dry, reach out and book your repair, and we will get the heat back and the drum turning.
My dryer runs but the clothes come out cold. What is wrong?
The drum is turning but the machine is not making heat. On an electric dryer that usually means a failed heating element or a blown thermal fuse, and on a gas dryer it points to the igniter or gas valve coils. Call us and we will test the right parts and replace what has failed.
Do you repair both gas and electric dryers?
Yes. We service gas and electric dryers, and we are licensed and insured for both. Let us know which type you have when you call and we will come prepared.
Why is my dryer taking two or three cycles to dry a load?
Longer drying times usually mean weak heat or restricted airflow. A blocked or crimped vent or duct traps the moist air so clothes stay damp. We check the heat source and the vent, and address a restriction if we find one.
My dryer has started squealing and thumping. Is it worth fixing?
Often, yes. Those sounds usually come from a worn drive belt, drum rollers, or the motor, all of which we replace. Fixing it early keeps one worn part from damaging others, so it is worth a call before it gets louder.
Which dryer brands do you work on?
We repair Samsung, LG, Whirlpool, and Maytag, along with other makes found in local homes. Tell us the brand and the symptom when you book and we will handle the diagnosis.
Can you tell me the cause before starting the repair?
Yes. We diagnose the dryer first, explain what has failed in plain terms, and then carry out the fix. You always know what is wrong before we do the work.
Gas and electric dryer repair in Brampton
Book your Brampton dryer repair today
Your dryer should dry a load and leave your clothes ready to wear. If it runs cold, sits silent, or squeals every turn, call us and get a straight diagnosis from a trusted local technician who fixes gas and electric dryers.